1
عمران::
نیروی گیرداری
� Enough preload (clamping force) must be applied to overcome any extemally applied cyclic load.
� For reciprocating machines, the clamping force of the anchor bolt should be at least 3 times the dead-weight of the machine.
It is the clamping force and friction, not grout adhesion, that prevents lateral movement (Vibration).
Initial preload: The clamping force imposed on the machine by the anchor bolt when it is first tightened from a relaxed state.
Residual preload: The clamping force remaining on the machinery after ex- temal forces or conditions have affected the initial preload over time.
واژگان شبکه مترجمین ایران
2
مکانیک::
نیروی قفل گیره
Building up clamping force quickly and reliably
The special pressure pads of the MX Series allow clamping force to be built up very quickly, and the pads always position exactly.
The clamping force is built up
- Clamping forces considerably reduced
In comparison to turntable molds, SpinForm offers numerous advan- tages, among which doubling the output while maintaining the same clamping force achieves the greatest effect.
واژگان شبکه مترجمین ایران